$5.45 inc. GST
$200.20 inc. GST
Spill Kit Refills
$105.60 inc. GST
Refill kits for General Purpose, Oil & Fuel, Chemical/Hazchem and Marine Spill Kits in 30L–240L sizes. Choose the Type and Size to view contents and restock existing spill kits. (Please note all Spill Kit Refills do NOT include a Grab N Go Bag and or Wheely Bin)
Description
Spill Kit Refills from Spillmaster provide a simple way to restock existing spill kits without replacing the bin or bag. Refills are available for General Purpose, Oil & Fuel (hydrocarbon), Chemical/Hazchem and Marine spill kits in 30L, 50L, 80L, 120L and 240L sizes.
Each refill contains the absorbents and accessories needed to return your spill kit to a ready-to-use condition for workplace spills. Suitable for workshops, warehouses, transport fleets, manufacturing sites and marine operations.
(Please note all Spill Kit Refills do NOT include a Grab N Go Bag and or Wheely Bin)
Select the Type and Size above to view the specific contents for each refill kit variation and simply add to cart the number you require and complete the checkout process.
Additional information
| Type | General Purpose, Oil & Fuel, Chemical/Hazchem, Marine |
|---|---|
| Size | 30L, 50L, 80L, 120L, 240L |
Emergency Marine Spill Response: The 5 C’s Guide
Workplace & Vessel Safety Notice: This procedure is tailored specifically for the Spillmaster Marine Oil & Fuel Spill Kit 240L. It may be printed as a Standard Operating Procedure (SOP), kept with the ship’s log, or displayed as a laminated placard near the bilge, fueling station, or marina berth.
1. CONTROL the Source & Risk
Open the red weather‑proof, salt‑resistant 240L wheeled spill kit bin, retrieve the nitrile gloves (2 pairs included), and ensure responders put them on before approaching the spill. If safe, immediately isolate the leak at its origin by shutting down fuel transfers, closing valves, plugging breaches, or securing tank vents to prevent further discharge into the vessel or the marine environment.
2. CONTAIN the Spread
For open water or large-scale containment, deploy the oil‑only polypropylene booms (125mm × 3m, 2 included), using the built-in clips to link them together to form a heavy-duty, continuous floating barrier that prevents fuel or oil from spreading across the water surface. Supplement the perimeter on decks or in tighter spaces by deploying the standard oil‑only absorbent socks (75mm × 1.2m, up to 5 included) end-to-end. Prioritise blocking access to scuppers, overboard drains, and open waterways.
3. COMMUNICATE the Hazard
Alert all crew, vessel passengers, or dock staff and immediately restrict access to the affected area, taking note of the heightened ignition, fire, and slip risks inherent to large marine fuel leaks. Notify the vessel master, port captain, or site WHS supervisor according to maritime safety protocols. Ensure the high-visibility spill kit sticker on the wheeled bin is properly maintained for rapid identification during an emergency.
4. CLEAN UP the Liquid
For concentrated pooling, tank overflows, or bulk bilge accumulations, deploy the oil‑only absorbent pillow (45cm × 45cm) directly into the flow to draw up bulk hydrocarbons. Use the necessary amount of heavy‑weight oil‑only poly pads (48cm × 43cm, up to 100 included) to cleanly skim fuel off the water’s surface or to wipe down fouled decks, hulls, and bulkheads. These specialized hydrophobic items will selectively absorb oils and fuels while completely repelling sea or bilge water. Collect all saturated materials and distribute them across the supplied contaminated waste bags (450mm × 720mm, up to 10 included) for safe handling.
5. CHECK & Restock
Inspect the hull, bilge, or water surface to ensure no slippery residue, dangerous fuel vapors, or rainbow sheen remains. Securely seal the contaminated waste bags and store them safely for proper disposal at an approved onshore maritime waste facility in accordance with local state EPA regulations. Restore full mobile response readiness by restocking the wheeled bin with a matching Spillmaster Refill Pack.
