Drain Warden with Gutter Guard
$245.00 +GST
Filter oils, silt, and debris directly at urban kerb inlets without restricting street drainage.
The Spillmaster Drain Warden with Gutter Guard delivers low-profile, high-flow filtration designed specifically for roadside grates, kerb gutters, and urban site entry points. Built with durable geotextile fabric and an integrated oil-absorbent bilge sock, it stops hydrocarbons and sediment from entering the stormwater system—available in standard sizes or custom-fabricated to match your exact drain specs.
-
Standard & Custom Urban Sizes: Designed for kerb inlets and gutter grates, with custom dimensions available for any site layout.
-
Dual-Action Filtration: Heavy-duty geotextile traps sand, litter, and sediment while the internal sock absorbs floating oils and fuels.
-
Low-Profile & Unobtrusive: Fits flush with street and kerb drainage structures to avoid tripping hazards or traffic obstruction.
-
EPA & WHS Compliant: Delivers fast, site-proven stormwater compliance for Australian municipal, commercial, and civil sites.
Description
The Spillmaster Drain Warden with Gutter Guard safeguards stormwater systems across Australia by trapping hydrocarbons, silt, trash, and sediment before they reach waterways. Featuring a large 2400mm x 1200mm skirt with an integrated 600mm catch basin and built-in gutter guard, this heavy-duty geotextile filter drops directly beneath drain grates to filter high-volume stormwater runoff. Additionally, this vehicle-safe and pedestrian-safe drain insert is widely used across Melbourne carparks, Sydney shopping centers, Perth marinas, Brisbane commercial hubs, and Adelaide industrial lots. It suits site supervisors, environmental officers, and civil contractors who require a continuous, nationwide-compliant solution for stormwater pollution control.
Technical Specifications & Product Details
- Generous Dimensions: 2400mm x 1200mm outer geotextile skirt with a deep 600mm catch basin
- Gutter Guard Protection: Integrated guard prevents large debris, litter, and leaves from clogging drain entrances
- Polypropylene Geotextile Mesh: Tough geotextile construction filters fine sediment, silt, and urban runoff
- Absorbent Bilge Sock: Heavy-duty oil-only absorbent sock rapidly captures floating oils and fuel residues
- Built-In Overflow Vent: Prevents localized flooding and surface pooling during extreme rain events
Stormwater Drain Protection: Need to safeguard your site’s drainage infrastructure against sediment and hydrocarbon runoff? Explore our complete range of Spill Containment & Control Solutions to ensure your site is equipped with high-efficiency stormwater filters.
WHS & EPA Environmental Compliance
- Dual-Action Pollution Control: Simultaneously filters physical sediment and urban litter while absorbing petroleum hydrocarbons from stormwater discharge.
- EPA & Council Standards: Helps Australian businesses comply with state EPA stormwater runoff guidelines and local council environmental standards.
- Duty of Care: Supports proactive site hazard management and environmental protection obligations in line with Safe Work Australia guidelines.
Frequently Asked Questions
What is the Drain Warden with Gutter Guard and how does it work?
The Drain Warden with Gutter Guard is a large-format stormwater drain filter installed beneath drain grates. Its 2400x1200mm skirt and gutter guard trap litter, leaves, silt, and coarse sediment, while an integrated absorbent bilge sock traps floating oils and hydrocarbons.
Where is the Drain Warden with Gutter Guard commonly used?
It is ideal for high-traffic urban carparks, commercial shopping centres, marinas, waterfront facilities, transport depots, and industrial sites across Melbourne, Sydney, Perth, Brisbane, and Adelaide.
How does the Drain Warden with Gutter Guard prevent flooding during heavy rain?
The unit features built-in overflow bypass vents that allow excess water to pass through safely during severe downpours, ensuring drains remain unblocked while still capturing heavy sediment and oil.
