$43.89 inc. GST
$43.89 inc. GST
General Purpose Spill Kit 15L
$43.89 inc. GST
The Spillmaster General Purpose Spill Kit 15L is a compact universal spill kit designed for fast cleanup of oils, coolants, paints, detergents and general workshop liquids. Ideal for workshops, warehouses and maintenance vehicles where small non‑hazardous spills must be controlled quickly and safely.
Description
The Spillmaster General Purpose Spill Kit 15L is a compact non‑hazardous spill response kit designed for fast cleanup of oils, coolants, paints, detergents and general workshop liquids. Its universal absorbents make it ideal for workshops, warehouses and maintenance vehicles where small everyday spills must be controlled quickly and safely.
This 15L kit is commonly used in workshops, warehouses, garages, storage areas and maintenance vehicles. It suits technicians, operators and maintenance crews who need a compact, portable spill kit for routine non‑hazardous liquid spills.
WHS & Spill Control
Universal absorbents ensure fast containment and reduced slip hazards while supporting WHS spill control requirements. Keeping a 15L spill kit on hand helps workplaces meet their duty to manage non‑hazardous spill risks in workshops, storage areas and equipment zones.
Technical Specifications & Kit Contents
Each Spillmaster 15L General Purpose Spill Kit contains the following components:
- 1 x PVC Spill Kit Bag
- 2 x Poly Pads – General Purpose – Heavy Weight – 48cm x 43cm
- 1 x Absorbent Sock – General Purpose – 75mm x 1.2m
- 1 x Floor Sweep 2.5kg
- 1 x Pair of Nitrile Gloves
- 1 x Cable Tie
Easy Compliance Restocking: Need to replenish your consumables? Matching 15L General Purpose Refill Packs are available to restock this kit and maintain full WHS/EPA compliance without buying a new Grab n Go Bag.
Additional information
| Weight | 4 kg |
|---|---|
| Dimensions | 56 × 42 × 32 cm |
| Compliance & Best Use | WHS Site Audit Ready, Compact All‑Liquid Spill Response, Workshops Garages & Service Vehicles, All-Liquid Daily Housekeeping Compliance, Mobile Equipment Tool Box Readiness, Rapid Emergency On-Road Staging |
| Suitable Environments | Workshops & Maintenance Areas, Garages & Small Industrial Worksites, Service Vehicles & Mobile Plant, Delivery Vans & Fleet Trucks, Tractors & Agricultural Machinery, Commercial Lawn Mowers & Landscaping Trailers, Mobile Technician & Tradie Vans, Courier Transport Vehicles |
| Spill Types & Chemical Compatibility | Oils Fuels & Coolants, Paints Detergents & General Liquids, Non‑Hazardous Spills, Engine Coolant & Radiator Fluid Leaks, Water-Based Paints & Solvent Splashes, Commercial Washdown Detergents & Degreasers, Jerry Can Fuel Overflows & Drips, General Liquid Shop Floor Spills |
Emergency Spill Response: The 5 C’s Guide
Workplace Safety Notice: This procedure is tailored specifically for the Spillmaster General Purpose Spill Kit 15L. It may be printed as a Standard Operating Procedure (SOP) or displayed as a laminated placard at the spill kit station.
1. CONTROL the Source & Risk
Remove the nitrile gloves from the spill kit bag and put them on before approaching the spill. If safe, stop the leak at its origin by closing valves, plugging the breach, or carefully uprighting the container to prevent further release.
2. CONTAIN the Spread
Place the general‑purpose absorbent sock (75mm × 1.2m) around the spill perimeter to prevent liquid migration. Prioritise blocking access to stormwater drains, unsealed ground, and pedestrian walkways.
3. COMMUNICATE the Hazard
Alert nearby workshop or transit staff and restrict access to the spill zone. For larger or hazardous universal liquid spills, notify your WHS supervisor or site emergency warden according to workplace procedures.
4. CLEAN UP the Liquid
Apply the 2.5kg floor sweep directly onto pooled liquid to solidify residues. Place the heavy‑weight general‑purpose pads (48cm × 43cm) onto remaining liquid to absorb the bulk of the spill. Collect all saturated absorbents and place them into the supplied contaminated waste bags for safe handling and disposal.
5. CHECK & Restock
Inspect the area to ensure no slippery residue or fluid sheen remains. Seal the waste bag using the supplied cable tie and dispose of it in accordance with local environmental regulations. Restore readiness by restocking the kit with a matching Spillmaster Refill Pack.
