120L Marine Oil & Fuel Spill Kit
Price range: $345.00 through $385.00 +GST
Marine oil and fuel spill response for marinas, ports and waterfront facilities.
Designed for spills involving oils, diesel, petrol and other compatible hydrocarbons. Supplied in a red 120L wheeled bin for convenient deployment in marine and waterfront environments.
Description
120L Marine Oil & Fuel Spill Kit — Standard & Professional
Marine spill response equipment housed in a red 120L wheeled bin for use around marinas, vessels, fuel transfer areas and waterfront workshops. Choose Standard for everyday oil and fuel spill response, or Professional for heavy-weight pads, floating oil-only booms, a pillow and nitrile gloves.
Marine spill response and preparedness
Oil-only absorbents are intended for hydrocarbon spill response. Site and vessel spill response plans should account for fuel type, environmental conditions, containment and applicable notification requirements. A spill kit alone does not guarantee AMSA or other regulatory compliance.
Restocking your marine spill kit
Check and replenish pads, socks, booms and disposal equipment after each use. Choose oil-only refill products compatible with your kit.
Delivery and custom configurations
Australia-wide delivery available. Contact Spillmaster about collection or customised kit requirements.
Frequently asked questions
What does Professional add?
Professional includes 40 heavy-weight oil-only pads, two 3m polypropylene booms with clips, an oil-only pillow and two pairs of nitrile gloves.
Are both kits supplied in red bins?
Yes. Both Standard and Professional configurations have red wheeled bins.
Does 120L mean 120 litres of absorption?
No. It is the nominal wheeled bin volume, not a tested absorbency rating.
Can the Professional booms be used on water?
The kit includes oil-only polypropylene booms with clips for marine hydrocarbon spill response. Deployment suitability depends on local conditions, site procedures and spill characteristics.
Additional information
| Weight | 35 kg |
|---|---|
| Dimensions | 55 × 50 × 90 cm |
| Compliance & Best Use | Marine Safety Ready, Large‑Capacity Oil & Fuel Spill Response, Marinas Commercial Vessels & Waterfront Operations, Commercial Vessel Survey & AMSA Compliance, High-Volume Fuel Dock Audit Placement, Rapid-Deploy Mobile Marine Pollution Readiness, AMSA |
| Suitable Environments | Marinas Docks & Pontoons, Commercial & Work Vessels, Waterfront Workshops & Service Pontoons, Commercial Ports & Shipping Terminals, Slipways Shipyards & Boat Repair Yards, Tugboats Barges & Support Vessels, Aquaculture & Fish Farming Sites, Coastal Fuel Bunkering Facilities |
| Spill Types & Chemical Compatibility | Oil Fuel & Diesel, Hydrocarbon Spills on Water, Hydrophobic Absorbents Float & Repel Water, Catastrophic Inboard Engine Room Bilge Failures, High-Volume Fuel Bowser & Bunkering Overflows, Heavy-Duty Marine Hydraulic Steering Line Bursts, Extensive Floating Diesel Fuel Slicks & Thick Oil Sheens, Commercial Vessel Gearbox & Transmission Fluid Breaches |
| Kit Option | Standard, Professional |
Emergency Marine Spill Response: The 5 C’s Guide
Workplace & Vessel Safety Notice: This procedure is tailored specifically for the Spillmaster Marine Oil & Fuel Spill Kit 120L. It may be printed as a Standard Operating Procedure (SOP), kept with the ship’s log, or displayed as a laminated placard near the bilge, fueling station, or marina berth.
1. CONTROL the Source & Risk
Open the red weather‑proof, salt‑resistant 120L wheeled spill kit bin, retrieve the nitrile gloves (2 pairs included), and ensure responders put them on before approaching the spill. If safe, immediately isolate the leak at its origin by shutting down fuel transfers, closing valves, plugging breaches, or securing tank vents to prevent further discharge into the vessel or the marine environment.
2. CONTAIN the Spread
For open water or large-scale containment, deploy the oil‑only polypropylene booms (125mm × 3m, 2 included), using the built-in clips to link them together to form a heavy-duty, continuous floating barrier that prevents fuel or oil from spreading across the water surface. Supplement the perimeter on decks or in tighter spaces by deploying the standard oil‑only absorbent socks (75mm × 1.2m, 2 included). Prioritise blocking access to scuppers, overboard drains, and open waterways.
3. COMMUNICATE the Hazard
Alert all crew, vessel passengers, or dock staff and immediately restrict access to the affected area, taking note of the heightened ignition, fire, and slip risks inherent to marine fuel leaks. Notify the vessel master, port captain, or site WHS supervisor according to maritime safety protocols. Ensure the high-visibility spill kit sticker on the wheeled bin is properly maintained for rapid identification during an emergency.
4. CLEAN UP the Liquid
For concentrated pooling, tank overflows, or bilge accumulations, deploy the oil‑only absorbent pillow (45cm × 45cm) directly into the flow to draw up bulk hydrocarbons. Use the necessary amount of heavy‑weight oil‑only poly pads (48cm × 43cm, up to 40 included) to skim remaining fuel cleanly off the water’s surface or to wipe down fouled decks, hulls, and bulkheads. These specialized hydrophobic items will selectively absorb oils and fuels while completely repelling sea or bilge water. Collect all saturated materials and place them into the supplied contaminated waste bags (450mm × 720mm, up to 7 included) for safe handling.
5. CHECK & Restock
Inspect the hull, bilge, or water surface to ensure no slippery residue, dangerous fuel vapors, or rainbow sheen remains. Securely seal the contaminated waste bags and store them safely for proper disposal at an approved onshore maritime waste facility in accordance with local state EPA regulations. Restore full mobile response readiness by restocking the wheeled bin with a matching Spillmaster Refill Pack.
Product Identification & Verification Record
| Product: | 120L Marine Oil & Fuel Spill Kit |
| SKU: | Not specified |
| Category: | Marine Spill Kits |
| Record Type: | Product Identification & Reorder Reference |
This record verifies the identity of the Spillmaster product shown above and provides a traceable product reference for record keeping, purchasing and future reordering. The QR code links directly to the current Spillmaster product record for product information and availability.
Emergency Spill Response: The 5 C’s Guide
- CONTROL the Source & Risk: Ensure appropriate personal protective equipment (PPE) is donned before approaching any hazardous release. If safe to do so, immediately mitigate the source by closing valves, uprighting damaged containers, or applying emergency plugging to stop further flow.
- CONTAIN the Spread: Deploy appropriate containment barriers, socks, or bunding around the perimeter of the spill to prevent fluid migration. Prioritise blocking access to stormwater drains, unsealed ground, and pedestrian thoroughfares.
- COMMUNICATE the Hazard: Alert nearby personnel, restrict site access around the affected zone, and notify your WHS supervisor or site emergency warden in accordance with facility safety protocols.
- CLEAN UP the Liquid: Apply matching loose absorbents, pads, or pillows directly onto the pooled liquid to capture, bind, and neutralize residues. Safely sweep up saturated materials and transfer all contaminated waste into certified disposal bags for secure handling.
- CHECK & Restock: Inspect the area thoroughly to ensure no residual hazards or slip risks remain. Seal and dispose of waste in compliance with local environmental regulations, and immediately restock equipment to maintain full operational readiness.
