80L Marine Oil & Fuel Spill Kit
$175.00 +GST
High-capacity marine spill control for commercial vessels, marinas, busy docks, and waterfront facilities.
The Spillmaster 80L Marine Oil & Fuel Spill Kit provides rapid, floating containment for larger hydrocarbon spills on water, including diesel, petrol, lubricants, and engine oils. Housed in a durable, high-visibility red PVC grab-n-go bag, it delivers robust first-response protection across marine work sites and fueling berths.
-
80L Hydrocarbon Capacity: Sized for substantial fuel transfer accidents, bunkering overflows, and heavy engine room liquid releases.
-
Water-Repellent Marine Absorbents: Premium hydrophobic pads, socks, and pillows selectively absorb oils and fuels while repelling water, floating indefinitely even at full saturation.
-
Durable Red PVC Grab ‘N’ Go Bag: Heavy-duty, weather-resistant carry bag shields absorbents from harsh ocean spray, UV, and rain.
-
WHS & Maritime Compliant: Satisfies Australian environmental standards and maritime duty-of-care regulations to keep your vessel or marine facility fully compliant.
Description
The Spillmaster 80L Marine Oil & Fuel Spill Kit is a high‑capacity marine spill response kit housed in a durable red PVC grab‑n‑go bag. Designed for fast cleanup of diesel, petrol, lubricants and engine oil on water, it is ideal for boats, marinas, docks and waterfront facilities. Additionally, this 80L kit is widely used across boats, marina workshops, service pontoons, and waterfront worksites. It suits boat owners, vessel operators, and marine maintenance personnel who require a larger, portable solution for managing hydrocarbon spills in marine environments.
Technical Specifications & Kit Contents
- 1 x Red PVC Grab‑N‑Go Spill Kit Bag
- 40 x Oil‑Only Poly Pads – Heavy Weight – 48cm x 43cm
- 4 x Oil‑Only Absorbent Socks – 75mm x 1.2m
- 1 x Oil‑Only Absorbent Pillow – 45cm x 45cm
- 1 x Pair of Nitrile Gloves
- 3 x Contaminated Waste Bags – 450mm x 720mm
- 1 x Spill Kit Sticker
- 1 x Spill Kit Instructions
Easy Compliance Restocking: Used your absorbents? Matching 80L Marine Oil & Fuel Refill Packs are available so you can replenish your pads, socks, pillow, and waste bags to maintain full WHS and EPA compliance without buying a new Grab N Go bag.
WHS & EPA Compliance
- Hydrophobic Absorbency: Oil‑only absorbents float indefinitely and repel water, ensuring fast containment and maximum recovery of marine fuel and oil spills in wet, tidal, or open‑water conditions.
- Standards Compliant: Meets AS1940:2017 requirements for spill response in workplace and marine environments handling hydrocarbons.
- Duty of Care: Helps vessel operators, marina managers, and waterfront crews satisfy site WHS requirements, prevent waterways contamination, and maintain EPA environmental compliance.
Frequently Asked Questions
What is the Spillmaster 80L Marine Oil & Fuel Spill Kit and what does it contain?
The Spillmaster 80L Marine Oil & Fuel Spill Kit is a high‑capacity spill response kit housed in a durable red PVC grab‑n‑go bag, designed for fast cleanup of diesel, petrol, lubricants and engine oil on water.
Where is the 80L Marine Spill Kit suitable for use?
It is widely used across boats, marina workshops, service pontoons, docks, and waterfront worksites, providing a larger, portable solution for managing hydrocarbon spills in marine environments.
Is this 80L marine kit AS1940 compliant?
Yes. The spill kit is AS1940:2017 compliant, meeting the spill response requirements specified in that standard for marine hydrocarbon spill management.
Additional information
| Weight | 5 kg |
|---|---|
| Dimensions | 64 × 17 × 58 cm |
| Compliance & Best Use | Marine Safety Ready, Mid‑Large Oil & Fuel Spill Response, Marinas Boats & Waterfront Operations, Commercial Vessel Survey & AMSA Compliance, High‑Risk Fuel Dock Audit Placement, Substantial Waterway Pollution Containment, AMSA |
| Suitable Environments | Boats & Commercial Vessels, Marinas Docks & Jetties, Waterfront Workshops & Service Pontoons, Commercial Fishing Trawlers & Workboats, Luxury Yachts & Passenger Ferries, Slipways & Shipyard Maintenance Bays, Foreshore Fuel Infrastructure Zones, Tugboat & Tug-Barge Operations |
| Spill Types & Chemical Compatibility | Oil Fuel & Diesel, Hydrocarbon Spills on Water, Hydrophobic Absorbents Float & Repel Water, Large‑Scale Engine Room Bilge Failures, Bulk Fuel Bowser & Fuel Dock Overflows, Marine Hydraulic Steering Line Ruptures, Floating Diesel Fuel Slicks & Glossy Oil Sheens, Heavy Inboard Engine Lubricant & Gearbox Fluid Spills |
Emergency Marine Spill Response: The 5 C’s Guide
Workplace & Vessel Safety Notice: This procedure is tailored specifically for the Spillmaster Marine Oil & Fuel Spill Kit 80L. It may be printed as a Standard Operating Procedure (SOP), kept with the ship’s log, or displayed as a laminated placard near the bilge or fueling station.
1. CONTROL the Source & Risk
Remove the pair of nitrile gloves from the red PVC Grab‑N‑Go spill kit bag and put them on before approaching the spill. If safe, immediately isolate the leak at its origin by shutting down fuel transfers, closing valves, plugging breaches, or securing tank vents to prevent further discharge into the vessel or the marine environment.
2. CONTAIN the Spread
Deploy the required number of oil‑only absorbent socks (75mm × 1.2m, up to 4 included) end-to-end around the spill perimeter on the deck, in the bilge, or directly on the water’s surface to halt hydrocarbon migration. Prioritise blocking access to scuppers, overboard drains, and open water where fuel or oil can rapidly spread and create an environmental sheen.
3. COMMUNICATE the Hazard
Alert all crew, vessel passengers, or dock staff and immediately restrict access to the affected area, taking note of the heightened ignition, fire, and slip risks inherent to marine fuel leaks. Notify the vessel master, port captain, or site WHS supervisor according to maritime safety protocols. Ensure the high-visibility spill kit sticker is cleanly displayed on the bag for rapid location during an onboard emergency.
4. CLEAN UP the Liquid
For concentrated pooling, tank overflows, or bilge accumulations, deploy the oil‑only absorbent pillow (45cm × 45cm) directly into the flow to draw up bulk hydrocarbons. Use the necessary amount of heavy‑weight oil‑only poly pads (48cm × 43cm, up to 40 included) to skim remaining fuel cleanly off the water’s surface or to wipe down fouled decks and bulkheads. These specialized hydrophobic items will selectively absorb oils and fuels while completely repelling sea or bilge water. Collect all saturated materials and place them into the supplied contaminated waste bags (450mm × 720mm, up to 3 included) for safe handling.
5. CHECK & Restock
Inspect the hull, bilge, or water surface to ensure no slippery residue, dangerous fuel vapors, or rainbow sheen remains. Securely seal the contaminated waste bags and store them safely onboard for proper disposal at an approved onshore maritime waste facility in accordance with local state EPA regulations. Restore full vessel readiness by restocking the kit with a matching Spillmaster Refill Pack.
Certificate of Compliance
| Product: | 80L Marine Oil & Fuel Spill Kit |
| SKU: | ES-SK80OM |
| Category: | Spill Kits & Refills |
| Capacity: | 80 L |
This certificate confirms that the spill kit or refill contents identified above are engineered and manufactured to satisfy applicable Australian standards and workplace health and safety requirements for hazardous liquid containment and spill response. Compliance is verified through absorbent capacity testing, component quality standards, and adherence to AS 1940-2017 storage and handling guidelines. Spillmaster maintains conformity records and provides this certificate to support workplace safety audits and environmental compliance obligations.
Emergency Spill Response: The 5 C’s Guide
- CONTROL the Source & Risk: Ensure appropriate personal protective equipment (PPE) is donned before approaching any hazardous release. If safe to do so, immediately mitigate the source by closing valves, uprighting damaged containers, or applying emergency plugging to stop further flow.
- CONTAIN the Spread: Deploy appropriate containment barriers, socks, or bunding around the perimeter of the spill to prevent fluid migration. Prioritise blocking access to stormwater drains, unsealed ground, and pedestrian thoroughfares.
- COMMUNICATE the Hazard: Alert nearby personnel, restrict site access around the affected zone, and notify your WHS supervisor or site emergency warden in accordance with facility safety protocols.
- CLEAN UP the Liquid: Apply matching loose absorbents, pads, or pillows directly onto the pooled liquid to capture, bind, and neutralize residues. Safely sweep up saturated materials and transfer all contaminated waste into certified disposal bags for secure handling.
- CHECK & Restock: Inspect the area thoroughly to ensure no residual hazards or slip risks remain. Seal and dispose of waste in compliance with local environmental regulations, and immediately restock equipment to maintain full operational readiness.
