$141.90 inc. GST
$350.90 inc. GST
Oil & Fuel Spill Kit 120L
$251.90 inc. GST
The Spillmaster Oil & Fuel Spill Kit 120L is a high‑capacity hydrocarbon response kit designed for medium to large diesel, petrol, lubricant and hydraulic oil spills. Ideal for workshops, warehouses and industrial sites, its hydrophobic absorbents repel water for fast, compliant spill control.
Description
The Spillmaster Oil & Fuel Spill Kit 120L is a high‑capacity hydrocarbon response kit designed for medium to large spills involving diesel, petrol, lubricants and hydraulic oils. Its hydrophobic absorbents repel water, making it suitable for workshops, warehouses, factories and industrial sites where reliable spill control is essential.
This 120L kit is widely used in plant equipment zones, refuelling areas, machinery bays, transport depots and maintenance facilities where a larger spill kit is required to manage oil and fuel spills safely and efficiently. The wheeled red bin allows rapid deployment across the site.
WHS & EPA Compliance
Hydrophobic pads, socks, pillows and floor sweep provide fast containment and reduced slip hazards while supporting WHS and EPA spill control requirements. Keeping a 120L spill kit on site helps workplaces meet their duty to manage hydrocarbon spill risks in workshops, warehouses and industrial environments.
Technical Specifications & Kit Contents
Each Spillmaster 120L Oil & Fuel Spill Kit contains the following high‑quality components:
- 1 x Red Wheeled Spill Kit Bin (Weather‑Resistant)
- 25 x Heavy‑Weight Oil‑Only Poly Pads (48cm x 43cm)
- 2 x FloorSweep 10kg
- 3 x Polypropylene Absorbent Socks – Oil Only (75mm x 1.2m)
- 1 x Polypropylene Absorbent Sock – Oil Only (75mm x 3m)
- 1 x Oil‑Only Absorbent Pillow (45cm x 45cm)
- 2 x Pairs of Nitrile Gloves
- 1 x Dustpan & Brush
- 7 x Contaminated Waste Bags (450mm x 720mm)
- 1 x Spill Kit Identification Sticker
- 1 x Step‑by‑Step Spill Response Instructions
Easy Compliance Restocking: Need to replenish your consumables? Matching 120L Oil & Fuel Refill Packs are available to restock this kit and maintain full WHS/EPA compliance without buying a new wheelie bin.
Additional information
| Weight | 30 kg |
|---|---|
| Dimensions | 55 × 50 × 90 cm |
| Compliance & Best Use | WHS Site Audit Ready, High‑Capacity Hydrocarbon Spill Response, Industrial Workshops & Refuelling Areas, High-Volume Fleet Depot Audit Placement, Strategic Staging Near Bulk Fuel Storage, Mandated Workplace Environmental Compliance |
| Suitable Environments | Warehouses & Manufacturing Floors, Workshops & Maintenance Bays, Refuelling Areas Plant Rooms & Equipment Bays, Commercial Transport Depots & Freight Terminals, Agricultural Yards & Harvester Machinery Sheds, Heavy Vehicle Fleet Garages, Civil Construction & Earthmoving Sites, Loading Docks & High-Traffic Forklift Transit Paths |
| Spill Types & Chemical Compatibility | Oil Fuel & Diesel, Hydrocarbon Liquids, Petroleum‑Based Spills, Catastrophic Hydraulic Hose Bursts, Bulk Fuel Bowser Overflows, Heavy Tractor & Earthmover Fuel Tank Punctures, Split 205L Engine Oil Drums on Hardstand Floors, Large-Scale Lubricant & Transmission Fluid Breaches |
Emergency Spill Response: The 5 C’s Guide
Workplace Safety Notice: This procedure is tailored specifically for the Spillmaster Oil & Fuel Spill Kit 120L. It may be printed as a Standard Operating Procedure (SOP) or displayed as a laminated placard at the spill kit station.
1. CONTROL the Source & Risk
Open the red weather‑resistant 120L wheeled spill kit bin, retrieve the nitrile gloves (2 pairs included), and ensure responders put them on before approaching the spill. If safe, stop the leak at its origin by closing valves, plugging the breach, or carefully uprighting the container to prevent further release.
2. CONTAIN the Spread
Deploy the required number of polypropylene oil‑only absorbent socks around the spill perimeter to halt hydrocarbon migration. For larger perimeters, deploy the long absorbent sock (75mm × 3m) and link the standard absorbent socks (75mm × 1.2m, up to 3 included) end-to-end to form a continuous, hydrophobic barrier. Prioritise blocking access to stormwater drains, unsealed ground, and open waterways.
3. COMMUNICATE the Hazard
Alert nearby workshop or site staff and restrict access to the spill zone, noting the heightened ignition or fire risk inherent to fuel leaks. For larger volumes or mobile incidents, notify your WHS supervisor or site emergency warden according to workplace procedures. Ensure the spill kit identification sticker on the bin is properly maintained and refer to the included step‑by‑step spill response instructions for rapid on-site reference.
4. CLEAN UP the Liquid
Apply the necessary amount of premium FloorSweep from the 10kg bags (2 included) directly onto the pooled hydrocarbons to rapidly absorb and break down the liquid. For deep pooling or sump leaks, submerge the oil‑only absorbent pillow (45cm × 45cm) into the flow, and use the heavy‑weight oil‑only poly pads (48cm × 43cm, up to 25 included) as required to wipe up surface films. Use the dustpan & brush to cleanly sweep up the saturated FloorSweep. Collect all contaminated materials and place them into the supplied contaminated waste bags (450mm × 720mm, up to 7 included) for safe handling.
5. CHECK & Restock
Inspect the area to ensure no slippery residue, dangerous fuel vapors, or surface sheen remains. Securely seal the contaminated waste bags and dispose of them in accordance with local state environmental regulations. Restore full mobile response readiness by restocking the wheeled bin with a matching Spillmaster Refill Pack.
