$130.90 inc. GST
$214.50 inc. GST
Oil & Fuel Spill Kit 50L
$163.90 inc. GST
The Spillmaster Oil & Fuel Spill Kit 50L is a portable hydrocarbon response kit designed for medium-sized diesel, petrol, lubricant and hydraulic oil spills. Ideal for service vehicles, workshops and industrial sites, its hydrophobic absorbents repel water for fast, compliant spill control.
Description
The Spillmaster Oil & Fuel Spill Kit 50L is a portable hydrocarbon response kit designed for medium-sized spills involving diesel, petrol, lubricants and hydraulic oils. Its hydrophobic absorbents repel water, making it ideal for workshops, service vehicles and industrial sites where reliable spill control is essential.
This 50L kit is commonly used in utes, trucks, mobile service units, machinery areas and refuelling points. It suits maintenance crews and operators who need a higher-capacity hydrocarbon spill kit that remains compact, portable and ready for rapid deployment.
WHS & EPA Compliance
Hydrophobic pads, socks and pillows provide fast containment and reduced slip hazards while supporting WHS and EPA spill control requirements. Keeping a 50L spill kit on site helps workplaces meet their duty to manage hydrocarbon spill risks in workshops, industrial areas and equipment zones.
AS1940:2017 Compliant Spill Kit: This spill kit meets the spill response requirements of AS1940:2017.
Technical Specifications & Kit Contents
Each Spillmaster 50L Oil & Fuel Spill Kit contains the following high-quality components:
- 1 x Red PVC Spill Kit Bag (Weather-Resistant)
- 25 x Heavy-Weight Oil-Only Poly Pads (48cm x 43cm)
- 3 x Polypropylene Absorbent Socks – Oil Only (75mm x 1.2m)
- 1 x Oil-Only Absorbent Pillow (45cm x 45cm)
- 1 x Pair of Nitrile Gloves
- 3 x Contaminated Waste Bags (450mm x 720mm)
- 1 x Spill Kit Identification Sticker
- 1 x Step-by-Step Spill Response Instructions
Easy Compliance Restocking: Need to replenish your consumables? Matching 50L Oil & Fuel Refill Packs are available to restock this kit and maintain full WHS/EPA compliance without buying a new Grab N Go Bag.
Additional information
| Weight | 5 kg |
|---|---|
| Dimensions | 64 × 17 × 58 cm |
| Compliance & Best Use | WHS Site Audit Ready, Mid‑Size Hydrocarbon Spill Response, General Workshop & Maintenance Operations, Mid-Capacity Fleet Vehicle Compliance, Strategic Staging Near Fuel Bowsers, Proactive Machinery Washdown Bay Readiness |
| Suitable Environments | Workshops & Maintenance Bays, Warehouses & Industrial Worksites, Service Vehicles & Mobile Plant, Transport Depots & Freight Terminals, Agricultural Chemical & Machinery Sheds, Heavy Vehicle Fleet Garages, Civil Construction & Earthmoving Sites, Forklift Charging & Transit Zones |
| Spill Types & Chemical Compatibility | Oil Fuel & Diesel, Hydrocarbon Liquids, Petroleum‑Based Spills, High-Pressure Hydraulic Hose Ruptures, Forklift & Tractor Fuel Tank Punctures, Split Diesel Drum Breaches on Concrete Floors, Bulk Engine Oil & Lubricant Overflows, Fuel Line Leaks on Transport Fleets & Harvesters |
Emergency Spill Response: The 5 C’s Guide
Workplace Safety Notice: This procedure is tailored specifically for the Spillmaster Oil & Fuel Spill Kit 50L. It may be printed as a Standard Operating Procedure (SOP) or displayed as a laminated placard at the spill kit station.
1. CONTROL the Source & Risk
Remove the pair of nitrile gloves from the red weather-resistant PVC spill kit bag and put them on before approaching the spill. If safe, stop the leak at its origin by closing valves, plugging the breach, or carefully uprighting the container to prevent further release.
2. CONTAIN the Spread
Deploy the required number of polypropylene oil-only absorbent socks (75mm × 1.2m, up to 3 included) end-to-end around the spill perimeter to halt hydrocarbon migration. Prioritise blocking access to stormwater drains, unsealed ground, and open waterways where fuels and oils can rapidly spread.
3. COMMUNICATE the Hazard
Alert nearby workshop or site staff and restrict access to the spill zone, noting the heightened ignition or fire risk inherent to fuel leaks. For larger volumes or high-risk incidents, notify your WHS supervisor or site emergency warden according to workplace procedures. Ensure the spill kit identification sticker is cleanly displayed and refer to the included step-by-step spill response instructions for rapid on-site reference.
4. CLEAN UP the Liquid
For concentrated pooling or sump leaks, deploy the oil-only absorbent pillow (45cm × 45cm) directly into the flow to draw up bulk hydrocarbons. Use the necessary amount of heavy-weight oil-only poly pads (48cm × 43cm, up to 25 included) to absorb surface films and wipe down contaminated surfaces. These specialized hydrophobic items will selectively absorb oils and fuels while completely repelling water. Collect all saturated materials and place them into the supplied contaminated waste bags (450mm × 720mm, up to 3 included) for safe handling.
5. CHECK & Restock
Inspect the area to ensure no slippery residue, dangerous fuel vapors, or surface sheen remains. Securely seal the contaminated waste bags and dispose of them in accordance with local state environmental regulations. Restore full response readiness by restocking the kit with a matching Spillmaster Refill Pack.
