$53.45 inc. GST
$82.50 inc. GST
Oil & Fuel Spill Kit 15L
$53.45 inc. GST
The Spillmaster Oil & Fuel Spill Kit 15L is a compact hydrocarbon response kit designed for rapid cleanup of diesel, petrol, lubricants and hydraulic oils. Ideal for vehicles, mobile technicians and tight workshop spaces, its hydrophobic absorbents repel water for fast, compliant spill control.
Description
The Spillmaster Oil & Fuel Spill Kit 15L is a compact hydrocarbon response kit designed for rapid cleanup of diesel, petrol, lubricants and hydraulic oils. Its hydrophobic absorbents repel water, making it ideal for vehicles, mobile technicians and tight workshop spaces where small spills must be contained quickly and safely.
This 15L kit is commonly used in service vehicles, utes, forklifts, plant equipment and maintenance areas. It suits mobile crews, remote sites and operators who need fast access to hydrocarbon absorbents during routine work.
WHS & EPA Compliance
Hydrophobic pads and socks ensure fast containment and reduced slip hazards while supporting WHS and EPA spill control requirements. Keeping a compact spill kit on board helps workplaces meet their duty to manage hydrocarbon spill risks in vehicles and equipment zones.
Technical Specifications & Kit Contents
Each Spillmaster 15L Oil & Fuel Spill Kit contains the following high-capacity components:
-
1 x 15L Plastic Spill Kit Bag
-
10 x Heavy-Weight Oil-Only Poly Pads (48cm x 43cm)
-
1 x Polypropylene Absorbent Sock (75mm x 1.2m)
-
1 x Premium Nitrile Gloves (Pair)
-
1 x Weatherproof Spill Kit Identification Sticker
-
1 x Step-by-Step Spill Response Instructions
-
1 x Heavy-Duty Waste Disposal Bag & Cable Tie
Easy Compliance Restocking: Need to replenish your consumables? Matching 15L Oil & Fuel Refill Packs are available to restock this kit and maintain full WHS/EPA compliance without buying a new Grab N Go Bag.
Additional information
| Weight | 4 kg |
|---|---|
| Dimensions | 56 × 42 × 32 cm |
| Compliance & Best Use | WHS Site Audit Ready, Vehicle & Mobile Plant Spill Response, Small Workshop Oil & Fuel Handling, Heavy Vehicle Field Service Compliance, Mobile Equipment Tool Box Readiness, Rapid Emergency On-Road Staging |
| Suitable Environments | Service Vehicles & Utes, Small Workshops & Garages, Mobile Plant & Equipment Toolboxes, Delivery Vans & Fleet Trucks, Tractors & Agricultural Machinery, Commercial Lawn Mowers & Landscaping Trailers, Civil Construction Site Machinery, Courier Transport Vehicles |
| Spill Types & Chemical Compatibility | Oil Fuel & Diesel, Hydrocarbon Liquids, Petroleum‑Based Spills, Hydraulic Hose Splits & Drips, Engine Oil Leaks, Jerry Can Refuelling Overflows, Small Diesel Tank Breaches, Greases & Lubricant Spills on Hardstand Floors |
Emergency Spill Response: The 5 C’s Guide
Workplace Safety Notice: This procedure is tailored specifically for the Spillmaster Oil & Fuel Spill Kit 15L. It may be printed as a Standard Operating Procedure (SOP) or displayed at the spill kit station.
1. CONTROL the Source & Risk
Open the 15L plastic spill kit bag, retrieve the pair of premium nitrile gloves, and ensure responders put them on before approaching the spill. If safe, stop the leak at its origin by closing valves, plugging the breach, or carefully uprighting the container to prevent further release.
2. CONTAIN the Spread
Deploy the polypropylene absorbent sock (75mm x 1.2m) around the spill perimeter to halt hydrocarbon migration. Prioritise blocking access to stormwater drains, unsealed ground, and open waterways to prevent environmental contamination.
3. COMMUNICATE the Hazard
Alert nearby staff and restrict access to the spill zone, keeping in mind the heightened ignition or fire risk inherent to fuel and oil leaks. For substantial volumes, notify your WHS supervisor or site emergency warden. Ensure the weatherproof spill kit identification sticker on the bag is visible and refer to the included step-by-step spill response instructions for rapid on-site reference.
4. CLEAN UP the Liquid
Lay down the heavy-weight oil-only poly pads (48cm x 43cm, up to 10 included) directly onto the pooled hydrocarbons to rapidly absorb the liquid while repelling water. Use the pads to wipe up surface films and clean affected surfaces. Collect all contaminated materials and place them into the heavy-duty waste disposal bag, securing it with the included cable tie.
5. CHECK and Restock
Inspect the area to ensure no slippery residue, dangerous vapors, or surface sheen remains. Dispose of the sealed waste bag in accordance with local state environmental regulations. Restore full response readiness by restocking the bag with a matching Spillmaster Refill Pack.
