$251.90 inc. GST
$86.90 inc. GST
Oil & Fuel Spill Kit 240L
$350.90 inc. GST
The Spillmaster Oil & Fuel Spill Kit 240L is a high‑capacity hydrocarbon response kit designed for large diesel, petrol, lubricant and hydraulic oil spills. Packed in a weatherproof wheely bin, its hydrophobic absorbents repel water for fast, compliant spill control in industrial and outdoor environments.
Description
The Spillmaster Oil & Fuel Spill Kit 240L is a heavy‑duty hydrocarbon response kit designed for large spills involving diesel, petrol, lubricants and hydraulic oils. Its hydrophobic absorbents repel water, making it suitable for workshops, warehouses, factories, transport depots and outdoor industrial sites where reliable spill control is essential.
This 240L kit is widely used in refuelling areas, machinery bays, plant equipment zones and high‑traffic industrial environments where a high‑capacity spill kit is required to manage significant oil and fuel spills safely and efficiently. The wheeled bin allows rapid deployment across the site.
WHS & EPA Compliance
Hydrophobic pads, socks, pillows and floor sweep provide fast containment and reduced slip hazards while supporting WHS and EPA spill control requirements. Keeping a 240L spill kit on site helps workplaces meet their duty to manage hydrocarbon spill risks in industrial and outdoor environments.
Technical Specifications & Kit Contents
Each Spillmaster 240L Oil & Fuel Spill Kit contains the following high‑quality components:
- 1 x 240L Wheeled Spill Kit Bin (Weather‑Resistant)
- 40 x Heavy‑Weight Oil‑Only Poly Pads (48cm x 43cm)
- 3 x FloorSweep 10kg
- 3 x Polypropylene Absorbent Socks – Oil Only (75mm x 1.2m)
- 1 x Polypropylene Absorbent Sock – Oil Only (75mm x 3m)
- 1 x Oil‑Only Absorbent Pillow (45cm x 45cm)
- 2 x Pairs of Nitrile Gloves
- 10 x Contaminated Waste Bags (450mm x 720mm)
- 1 x Spill Kit Identification Sticker
- 1 x Step‑by‑Step Spill Response Instructions
Easy Compliance Restocking: Need to replenish your consumables? Matching 240L Oil & Fuel Refill Packs are available to restock this kit and maintain full WHS/EPA compliance without buying a new wheelie bin.
Additional information
| Weight | 40 kg |
|---|---|
| Dimensions | 60 × 70 × 105 cm |
| Compliance & Best Use | WHS Site Audit Ready, Large‑Scale Hydrocarbon Spill Response, High‑Risk Industrial & Refuelling Operations, Maximum-Volume Emergency Fuel Containment, Mandated Site Environmental Compliance Audit Staging, Rapid-Deploy Mobile Wheelie Bin Readiness |
| Suitable Environments | Warehouses & Manufacturing Floors, Refuelling Areas & Plant Rooms, Industrial Workshops & Maintenance Bays, Commercial Transport Depots & Freight Terminals, Agricultural Cooperatives & Harvester Sheds, Civil Earthmoving & Construction Infrastructure Sites, Marine Refuelling Docks & Shipyards, Loading Docks & High‑Traffic Forklift Transit Zones |
| Spill Types & Chemical Compatibility | Oil Fuel & Diesel, Hydrocarbon Liquids, Petroleum‑Based Spills, Catastrophic High-Pressure Hydraulic Line Bursts, Bulk Fuel Bowser & Storage Tank Overflows, Major Heavy Tractor & Earthmover Tank Punctures, Complete Split 205L Engine Oil Drums on Hardstand Floors, Large-Scale Transmission Fluid & Volatile Hydrocarbon Breaches |
Emergency Spill Response: The 5 C’s Guide
Workplace Safety Notice: This procedure is tailored specifically for the Spillmaster Oil & Fuel Spill Kit 240L. It may be printed as a Standard Operating Procedure (SOP) or displayed as a laminated placard at the spill kit station.
1. CONTROL the Source & Risk
Open the weather‑resistant 240L wheeled spill kit bin, retrieve the nitrile gloves (2 pairs included), and ensure responders put them on before approaching the spill. If safe, stop the leak at its origin by closing valves, plugging the breach, or carefully uprighting the container to prevent further release.
2. CONTAIN the Spread
Deploy the required number of polypropylene oil‑only absorbent socks around the spill perimeter to halt hydrocarbon migration. For large-scale containment, deploy the long absorbent sock (75mm × 3m) and link the standard absorbent socks (75mm × 1.2m, up to 3 included) end-to-end to form a continuous, high-volume hydrophobic barrier. Prioritise blocking access to stormwater drains, unsealed ground, and open waterways.
3. COMMUNICATE the Hazard
Alert nearby workshop or site staff and restrict access to the spill zone, keeping in mind the heightened ignition or fire risk inherent to large fuel leaks. For substantial volumes or high-risk incidents, notify your WHS supervisor or site emergency warden according to workplace procedures. Ensure the spill kit identification sticker on the bin is properly maintained and refer to the included step‑by‑step spill response instructions for rapid on-site reference.
4. CLEAN UP the Liquid
Apply the necessary amount of premium FloorSweep from the 10kg bags (3 included) directly onto the pooled hydrocarbons to rapidly absorb and bind the liquid. For deep pools or ongoing leaks, deploy the oil‑only absorbent pillow (45cm × 45cm) directly into the liquid, and use the heavy‑weight oil‑only poly pads (48cm × 43cm, up to 40 included) as required to wipe up surface films. Collect all contaminated materials and distribute them across the supplied contaminated waste bags (450mm × 720mm, up to 10 included) for safe handling.
5. CHECK & Restock
Inspect the area to ensure no slippery residue, dangerous fuel vapors, or surface sheen remains. Securely seal the contaminated waste bags and dispose of them in accordance with local state environmental regulations. Restore full mobile response readiness by restocking the wheeled bin with a matching Spillmaster Refill Pack.
